1111 Cessna 180, 185 Aircraft Stabilizer Jack Screw Actuator Kit | McFarlane Aviation

Please use the documents below to confirm the CCH-KT-9 Cessna 180 Aircraft Carburetor Heat Repair Kit’s compatibility with your aircraft.

• Cessna Stabilizer Jack Screw Actuator Kit Eligibility Chart (PDF)
• Parts Manufacturer Approval PMA List Supplement 52 (PDF)

Improved material for extreme corrosion resistance

McFarlane replaces the original steel components with duplex stainless steel (even better than monel) components for a long life.

• Wear and vibration resistance for longer life
• No rust, even in harsh saltwater environments
• Costs less than the standard parts

Now improved with a Black Max™ nitrocarburized screw assembly to reduce friction and extend service life!

Ultra-precision bearing with no backlash

Improved Bearing
Precision bearing reduces free play and features extra low temperature grease for easy turning at low temperatures

Improved Strength and Reliability
The original Cessna actuators use a 3/32″ roll pin to attach the sprockets and retaining collars to the screw bars. These pins are critical as the front of the stabilizer would detach from the airframe if they failed. Although the original roll pins are technically strong enough, due to the nature of roll pins, they are prone to unpredictable failure. This is especially true if they are bent or damage during installation. To provide a more robust design, McFarlane redesigned the sprocket and retaining collar to allow the use of a 5/32″ roll pin. This more than doubles the strength of the design. The screw and barrel are match machined for a precision fit.

Convenient Kit
Stabilizer jack screw actuator kit part number 1111 is an FAA-PMA/STC approved kit to replace all wear components for the stabilizer actuator assemblies for many Cessna 180, 182 and 185 aircraft. The convenient kit includes all parts required to replace the following Cessna parts in both the left-hand and right-hand actuators:

• 0310332 Sprocket
• 0432138-3 or S2295-25-185 Chain
• 0712500-7 Collar-retainer
• 0712500-10 Bushing
• 0712500-11 Screw bar
• 0712500-13 Barrel
• 0712500-19 Plug
• 0712502 Bushing, eccentric
• MS20201KP6A or AN201KP6A Bearing
• NAS561-3-8 Roll pin

Replacement Components
Part number 1111 contains the following replacement components:

• 6361 Roller chain
• 6464 Connecting link
• 6458 Upper bushing
• 6459 Lower bushing
• 6460 Bearing
• 6461 Spring pin (can only be used as a replacement with McFarlane p/n 1111)

Trim Actuator Boot and Clamp

Now FAA-PMA approved and manufactured by McFarlane

Boot PN MC0712500-18 and Clamp PN MC7137

• McFarlane recommends replacing the boot and clamp at the same time.
• High quality, flexible, durable, long life material
• Save 70% off OEM list price!

Convenient Tool

Stabilizer Jack Screw Pin Removal Tool 

P/N TOOL131

Easily and safely remove and install your roll pin with the turn of a wrench.

Maintenance Tip!

If the stabilizer is sluggish or jams, clean the barrel and screw jack and re-apply a coating of MIL-PRF-23827 low temperature grease. Rayco 27 or Aeroshell 7 both meet MIL-PRF-23827. For complete instructions, see the