URHB32S Tempest Aviation Spark Plug | Fine Wire Electrode | FAA-PMA | Aero Accessories, Inc.

Please confirm the URHB32S Tempest spark plug’s compatibility with your aircraft using these documents:

• Tempest spark plug application guide (PDF)
• Tempest spark plug specifications (PDF)
• Tempest spark plug resistance schematic (PDF)

Tempest uses the most automated manufacturing processes in the aviation industry to produce spark plugs with the following features:

• High Conductivity Copper Core Center Electrode: Copper, co-extruded inside a nickel alloy sleeve ensures outstanding heat and electrical conductivity while the nickel sleeve offers high resistance to corrosive combustion gases.
• Proprietary Glass Center Seal: 21st century ‘fired in’ resistor replaces the multipart screw, spring, and carbon pile stack up used in competitive plugs and known to suffer from resistance value instability that can cause misfires, wasted fuel, and engine roughness.
• High Alumina Ceramic Insulator: High mechanical strength, superior dielectric properties, and proprietary protective glaze, provides high performance to conquer severe operational conditions. “Clean Collar” massive electrode “V” tip focuses heat to reduce fouling and enhance heat range control.
• Nickel Finish: Environmentally preferable electrolytic nickel provides outstanding durable finish, superior corrosion protection, and extreme wear resistance.
• Nickel Ground Electrodes: Aviation grade nickel electrode design focuses on minimizing sparking voltage requirements while maintaining specification gaps to ensure large, stable ‘flame kernels’ for on-time ignition and complete combustion
• Vacuum Infused Center Electrode: The proprietary vacuum infusion process seals the electrode/insulator gap providing stable heat range and superior center electrode cooling (heat flow to the insulator).
• Hot-Lock Assembly: Intense pressure and heat create positive, zero-leakage, shrunken in seal between insulator and shell to contain the hot, high pressure combustion cycle gases.
• Harness Wire Contact: Our smooth, uninterrupted, oxide treated spring contact surface offers enhanced corrosion resistance, is chemically bonded to the fired-in resistor providing the ultimate harness/spark plug termination integrity and energy transfer.

Product Details:

• • FAA-PMA Approved

• Reach: 13/16″
• Connector Threads: 3/4″-20
• Electrode Design: Fine Wire