00-8120 Synchronizer Circuit for Aircraft Light Pulse Feature | AeroLEDs | McFarlane Aviation 008120

Please use the lighting pages the McFarlane Aviation catalog below to confirm the 00-8120 Synchronizer’s compatibility with your aircraft.

• Lighting eligibility charts and accessory parts section of McFarlane Aviation Catalog, Inc. catalog (PDF)

• Direct replacement
• Up to 80% reduced power consumption
• Long life; over 50,000 hours!
• Light weight; no heavy power supply
• Zero maintenance
• Replaces 02-1002, 00-8120
• Manufactured by AeroLEDs LLC

The sync circuit is used to synchronize the pulse features when using more than one light, this becomes especially important when lights are in close proximity. This unit can be used to increase visibility in the lights by creating alternating flashing. This creates increased safety in flight. It is manufactured for use between any two wigwag lights to increase safety via visibility.

AeroLEDs offer high efficiency, direct replacement LED lighting for hundreds of aircraft. AeroLEDs are light weight, shock and vibration resistant, and have low drag. LED lighting easily lasts over 50,000 hours of continuous operation with no reduction by on/off cycles, with up to 80% reduced power consumption. The built-in Pulse Mode and synchronization blink the light on and off at a 1Hz rate when power is applied to the Pulse Mode power wire. Higher color temperature provides superior visibility and clarity.
Increased Safety

AeroLED lights allow you to comply with the latest FAA recommendations (Operation Lights On) regarding extended use of taxi, landing and anti-collision lights without fear of reduced light performance or life. They all feature optimized light color (6500k sunlight equivalent) for proven superior air-to-air recognition. The landing lights also feature a pulsed recognition light mode.

Reduced Power Consumption

High efficiency LED lights use less than 1/3 the power of halogen bulbs. They significantly reduce the load on the electrical system and they will not dim due to low voltage typical of low RPM final approaches when you need them most!

Longer Life – Zero Maintenance

All AeroLED products are designed to be a “lifetime buy.” They last over 50,000 hours when properly installed and do not degrade with on/off cycles. They are extremely rugged and hardened against all kinds of electrical damage, shock and vibration.

Pulse Recognition Mode

AeroLED lights with pulse mode (or wig-wag mode) greatly improve safety by alternately blinking the left then right light once per second. This dramatically increases your aircraft visibility to prevent both air and ground collisions. At least one 36HX or 46HX series light must be installed to enable pulse mode.