CS1002 PROP GUARD Three Blade Boot Kit, Metal Propeller, FAA-PMA/STC McFarlane

CS1002 PROP GUARD Anti-Abrasion Boot Kit contains: PROP GUARD boot for a three bladed propeller, adhesion accelerator, placard, lint-free cotton cloth, complete installation instructions and a copy of the STC. Please see Part Number FP1001 for two blades.

It is more economical to protect your propeller blades with PROP GUARD than to continually file, dress, paint and balance your blades until they have to be replaced. Water, sand, rock, and airborne abrasives are constantly eroding your propeller. As the name suggests, this product can eliminate this destructive process. Virtually all propeller blade failures start as leading edge nicks.

• PROP GUARD is a 0.014″ thick clear anti-abrasion boot that is bonded to the leading edge of the propeller
• PROP GUARD is made from a special high strength heat processed polymer engineered for centrifugal loads. It is NOT just a piece of tape!
• Approximately 20 minutes installation time
• No performance loss
• Fully tested
• Repairable
• ANAC-STC (Brazil), FAA-PMA, FAA-STC (minor alteration, no form 337 required) approved
• Manufactured by McFarlane Aviation, Inc.

Convenient Repair Kits

Repair kits to allow repair of existing PROP GUARD installations. Please see P/N PG-KT-R12 for 12 inches of material or P/N PG-KT-R24 for 24 inches of material.

PROP GUARD Installation Tool

P/N TOOL125 is a rubber coated roller that makes working air bubbles out during installation easier than using the spatula included with the PROP GUARD kits. Saves time and makes installation easier!