AA48103-2 Tempest Aviation Spin EZ Spin-On Oil Filter | Aero Accessories, Inc.

Please confirm the AA48103-2 oil filter’s compatibility with your aircraft using the following document:

• Tempest Oil Filter Application Guide (PDF)

AA48103-2 TEMPEST SPIN EZ FILTER

Tempest’s SPIN EZ filters are designed to come off easy. Heat, time and pressure can extrude oil, grease, DC4® compound or similar liquid lubricants from between a filter’s rubber seal and the filter mount pad – leaving the filter seemingly “bonded” to the engine’s mount pad – and making it nearly impossible to remove. Tempest’s proprietary SPIN EZ adhered solid seal lubricant stays where it’s supposed to – between the seal and the mount pad’s surface. SPIN EZ solid lubricant won’t extrude or squirt out from under the seal. It prevents the bond forming environment that makes legacy filters stick.

Avoid frustration. Save time and money. No more messy DC-4 compound. No more stabbed cans. No more busted knuckles. No more bad words. At your next filter change, UPGRADE to state-of-the-art Tempest SPIN EZ oil filters – the filter that comes off without a fight!

Total Manufacturing Control – Tempest Spin EZ® filters are the only aviation oil filters made in a state of the art aviation oil filter plant built solely for, and dedicated to, the manufacture of aviation oil filters. Total process control helps ensure the highest standard of quality.

Features and Benefits

Improved Nut Welds – Nut welds are so strong that the can will distort without breaking the welds! During production testing nuts are actually ripped away from the can – the base metal must fail, the welds must not. Using Tempest Original filters means no more frustration with installation nuts falling off.

Improved By-Pass Valve for Continental® Engines – Meets TCM by-pass specification of 12-14 psi, reducing risk of premature bypass that can result in unfiltered oil flowing to your engine.
PC Housing (Patent Pending) – the only filter to incorporate a housing for the by-pass valve to prevent the restriction of the oil outlet should a failure of the by-pass valve occur.

Burst strength of 600 psi – Significant improvements to the roll seam process used on the bottom of the can substantially improved the design burst strength of the Tempest Spin EZ oil filter to over 600 pounds per square inch, exceeding the ARP 1400 standard by 50 percent. Extra strength gives added assurance that Tempest oil filters are made to withstand the harshest operating conditions.
Full Pleat Media – The resin-impregnated, cellulosic, full pleat media is designed for uniform flow and collapse resistance. 312 square inches is the most in aviation oil filters.

Spin EZ® Solid Lubricant – Tempest Spin EZ oil filter’s proprietary solid lubricant allows for easy removal of the filter. Unlike oil, grease or DC4 compound that leave the filter seemingly “bonded” to the engines mount pad, making it nearly impossible to remove, our Spin EZ solid lubricant wont extrude or squirt out from under the seal; allowing for removal without a fight.