SEAT-KT-2 Cessna Seat Roller Kit, McFarlane | SEATKT2
This kit is used with the Standard or Vertically adjustable seat installed in Cessna single engine aircraft from 1963 through 1986. See Eligibility Chart
Product Details
| Note: One SEAT-KT-2 required per seat. The SEAT-KT-2 contains the same components as four of the Cessna 1414100-212 kits. |
This kit is used with the Standard or Vertically adjustable seat installed in Cessna single engine aircraft from 1963 through 1986. This seat is identified by one or no adjustment crank handles. The seat back angle is adjusted with a lever on the side of the seat back. It is also used with some 336-337 series aircraft.
SEAT-KT-2 Roller diameter approximately 5/8”
This kit is used with the “Standard” or “Vertically adjustable” seat installed in Cessna single engine aircraft from 1963 through 1986. This seat is identified by one or no adjustment crank handles. The seat back angle is adjusted with a lever on the side of the seat back. It is also used with some 336- 337 series aircraft. The SEAT-KT-2 contains the same components as four of the Cessna 1414100-212 kits. These parts are not used on models 150-152.
- (8) MCS1554-1 Washer
- (4) MCS1551-1 Roller
- (4) MC1414104-54 Bushing
Eligible Aircraft
Make Series Model Beginning S/N Ending S/N Comment Eligibility Chart Cessna 172 172D 17249545 17250572 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 172 172E 17250573 17251822 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 172 172F (T-41A) 17251823 17253392 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 172 172G 17253393 17254892 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 172 172H (T-41A) 17254893 17256512 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 172 172I 17256513 17257161 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 172 172K 17257162 17259223 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 172 172L 17259224 17260758 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 172 172M 17260759 17263458 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 172 172M 17263459 17267584 Part eligibility must be determined by the seat design installed in the aircraft. Eligible for front seats (Pilot/Copilot) 1028 Cessna 172 172N 17267585 17274009 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 172 172P 17274010 17276654 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 172 172Q 17275869 17276211 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 172 172RG 172RG0001 172RG1191 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 172 F172D F172-0001 F172-0018 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 172 F172E F172-0019 F172-0085 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 172 F172F F172-0086 F172-0179 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 172 F172G F172-0180 F172-0319 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 172 F172H F17200655 F17200754 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 172 F172H F17200655 F17200754 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 172 F172K F17200755 F17200804 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 172 F172L F17200805 F17200904 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 172 F172M F17200905 F17201234 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 172 F172M F17201235 F17201514 Part eligibility must be determined by the seat design installed in the aircraft. Eligible for front seats (Pilot/Copilot) 1028 Cessna 172 F172N F17201515 F17202039 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 172 F172P F17202040 F17202254 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 172 FP172 FP172-0001 FP172-0003 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 172 FR172E FR17200001 FR17200060 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 172 FR172F FR17200061 FR17200145 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 172 FR172G FR17200146 FR17200225 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 172 FR172H FR17200226 FR17200350 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 172 FR172J FR17200351 FR17200590 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 172 FR172K FR17200591 FR17200675 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 172 P172D P17257120 P17257188 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 172 R172K R1722000 R1723454 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 180 180F 18051184 18051312 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 180 180G 18051313 18051445 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 180 180H 18051446 18052284 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 180 180J 18052285 18052384 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 180 180J 18052385 18052770 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 180 180K 18052771 18053203 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 182 182F 18254424 18255058 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 182 182G 18255059 18255844 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 182 182H 18255846 18256684 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 182 182J 18256685 18257625 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 182 182K 18257626 18258505 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 182 182L 18258506 18259305 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 182 182M 18259306 18260055 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 182 182N 18260056 18260825 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 182 182P 18260826 18262465 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 182 182P 18262466 18265175 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 182 182Q 18265176 18267715 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 182 182R 18267716 18268586 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 182 A182J A182-0001 A182-0056 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 182 A182K A182-0057 A182-0096 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 182 A182L A182-0097 A182-0116 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 182 A182N A182-0117 A182-0148 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 182 F182P F18200001 F18200025 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 182 F182Q F18200026 F18200169 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 182 FR182 FR18200001 FR18200070 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 182 R182 R18200001 R18202041 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 182 T182 18267716 18268541 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 182 TR182 R18200584 R18202041 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 185 185B 185-0513 185-0653 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 185 185C 185-0654 185-0776 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 185 185D 185-0777 185-0967 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 185 185E 185-0968 185-1149 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 185 A185E 18501600 18502090 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 185 A185E 185-0968 185-1599 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 185 A185F 18502091 18502310 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 185 A185F 18502311 18504448 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 188 188 188-0001 188-0572 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 188 188A 18800573 18800832 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 188 188B 18800833 18802348 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 188 A188 188-0001 188-0572 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 188 A188A 18800573 18800832 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 188 A188B 18800833 18802348 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 188 A188B 18802349 18803973 1028 Cessna 188 A188B (w/ large hopper) 18800833T 18802348T 1028 Cessna 188 A188B (w/ large hopper) 18802349T 18803973T 1028 Cessna 188 T188C T18803325T T18803974T Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 205 210-5 (205) 205-0001 205-0480 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 205 210-5A (205A) 205-0481 205-0577 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 206 206 206-0001 206-0275 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 206 P206 P206-0002 P206-0160 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 206 P206A P206-0161 P206-0306 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 206 P206B P206-0307 P206-0419 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 206 P206C P206-0420 P206-0519 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 206 P206D P206-0520 P206-0603 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 206 P206E P20600604 P20600647 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 206 TP206A P206-0191 P206-0306 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 206 TP206B P206-0307 P206-0419 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 206 TP206C P206-0420 P206-0519 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 206 TP206D P206-0520 P206-0603 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 206 TP206E P20600604 P20600647 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 206 TU206A U206-0487 U206-0656 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 206 TU206B U206-0657 U206-0914 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 206 TU206C U206-0915 U206-1234 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 206 TU206D U206-1235 U206-1444 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 206 TU206E U20601445 U20601700 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 206 TU206F U20601701 U20602199 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 206 TU206F U20602200 U20603521 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 206 TU206G U20603522 U20607020 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 206 U206 U206-0276 U206-0437 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 206 U206A U206-0438 U206-0656 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 206 U206B U206-0657 U206-0914 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 206 U206C U206-0915 U206-1234 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 206 U206D U206-1235 U206-1444 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 206 U206E U20601445 U20601700 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 206 U206F U20601701 U20602199 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 206 U206F U20602200 U20603521 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 206 U206G U20603522 U20607020 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 207 207 20700001 20700362 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 207 207A 20700363 20700788 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 207 T207 20700001 20700362 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 207 T207A 20700363 20700788 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 210 210C 21058086 21058220 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 210 210D 21058221 21058510 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 210 210E 21058511 21058715 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 210 210F 21058716 21058818 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 210 210G 21058819 21058936 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 210 210H 21058937 21059061 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 210 210J 21059062 21059199 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 210 210K 21059200 21059502 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 210 210L 21059503 21061573 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 210 210M 21061574 21062954 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 210 210N 21062955 21064135 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 210 210N 21064136 21064897 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in the Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 210 210R 21064898 21065009 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 210 P210N P21000001 P21000834 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 210 P210R P21000835 P21000874 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 210 T210F T210-0001 T210-0197 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 210 T210G T210-0198 T210-0307 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 210 T210H T210-0308 T210-0392 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 210 T210J T210-0393 T210-0454 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 210 T210K 21059200 21059502 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 210 T210L 21059503 21061573 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 210 T210M 21061574 21062954 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 210 T210N 21062955 21064135 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 210 T210N 21064136 21064897 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in the Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 210 T210R 21064898 21065009 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 336 336 336-0001 336-0195 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 337 337 337-0002 337-0239 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 337 337A (USAF O2B) 337-0240 337-0525 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 337 337B 337-0526 337-0755 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 337 337C 337-0756 337-0978 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 337 337D 337-0979 337-1193 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 337 337E 33701194 33701316 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 337 337F 33701317 33701462 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 337 337G 33701463 33701815 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 337 337H 33701816 33701950 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 337 F337E F3370001 F3370024 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 337 F337F F3370025 F3370055 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 337 F337G F3370056 F3370084 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 337 F337H F3370085 F3370086 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 337 FT337E FT3370001 FT3370024 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 337 FT337F FT3370025 FT3370055 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 337 FT337GP (FP337) FP3370001 FP3370022 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 337 FT337HP (FP337H) FP3370023 FP3370023 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 337 T337B 337-0526 337-0755 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 337 T337C 337-0756 337-0978 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 337 T337D 337-0979 337-1193 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 337 T337E 33701194 33701316 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 337 T337F 33701317 33701398 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 337 T337G P3370001 P3370292 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028 Cessna 337 T337H 33701816 33701950 Part eligibility must be determined by the seat design installed in the aircraft. This kit is to be used with the standard or vertically adjustable seat installed in Cessna aircraft. This seat is identified by one or no adjustment crank handles. 1028
| Weight | 0.00 lbs |
|---|---|
| Dimensions | 00 × 00 in |
If you need to pick up parts our store and warehouse is conveniently located at Allegheny County Airport (KAGC) in Western Pennsylvania. Fly or drive in for your parts if you are in the area!
Aircraft Supply and Repair Inc.
21 Allegheny County Airport
West Mifflin, Pennsylvania 15122
- Orders: 800.569.9397
- Customer Service & Technical Support: 412.469.1747
- Fax: 412.469.8271
- info@aircraftsupply.com
Call us if you need assistance, Parts Support is our expertise and we are happy to help. Please feel free to contact us at 1.800.569.9397, 412.469.1747 or by email, info@aircraftsupply.com We look forward to supporting your aircraft needs!
