UJP-KT-5T Piper Universal Joint Replacement Kit w/ Tools contains the following approved components:
Part Number | Description | Quantity | Unit of Measure |
---|---|---|---|
404-156 | NUT, Piper (MS21083N3) | 2 | Each |
404-526 | NUT, Piper (MS21042-3) | 2 | Each |
62716-007 | SHAFT | 1 | Each |
6532 | REAMER, Taper, #1 B&S | 1 | Each |
6533 | DRILL BIT, #5 HSS Jobber | 1 | Each |
AN386-1-6A | PIN, Taper | 2 | Each |
AN975-3 | WASHER, Taper Pin | 2 | Each |
CA62834-000SS | UNIVERSAL JOINT | 1 | Each |
NAS1149F0363P | WASHER, #10, Steel, .063 | 2 | Each |
- Manufactured by McFarlane Aviation, Inc.
- Fits many Piper PA-28, PA-32 model aircraft
- Replace worn or corroded joints
AD2010-15-10 requires inspection of the connection between the control yoke universal joint and the shaft on the forward (engine) end of the joint. This inspection is a convenient time to replace worn out u-joints.
A universal joint attaches to each control yoke shaft behind the instrument panel. Replacement of the universal joint is recommended if any free motion or rust around the joint pivots is detected.
Each convenient kit also includes two types of nut; only two of the four nuts provided are required when installing the universal joint. Refer to the illustrated parts catalog for your aircraft to determine the correct fastener configuration.